

Lift Gate Conveyor | PCB Handing Conveyor
The Lift Gate Conveyor is designed to facilitate easy access across production lines while maintaining efficient transport of PCBs and other components. This system allows operators to move freely between different areas of the manufacturing process.

Lift Gate Conveyor | PCB Handing Conveyor
- Description
Description
Precision Vertical Motion System
-
Dual-Action Pneumatic Lift: Synchronized Ø32mm cylinders enable vertical ascent/descent (200mm stroke) with velocity-controlled damping, maintaining PCB stability during height transitions. Mechanical end-stops prevent over-travel.
-
Fail-Safe Pneumatic Lock: Redundant ISO 6432-compliant locks engage upon reaching target height, securing the conveyor against vibration or accidental collapse under 150kg dynamic loads.
Adaptive Line Integration
-
On-Demand Passage Configuration: 650mm-wide maintenance corridor (customizable ±50mm) facilitates technician access without SMT line interruption. Anodized aluminum side plates resist deformation during repeated cycling.
-
Tool-Less Width Adjustment: Hardened lead screws enable track-width reconfiguration (250–460mm range) in <30 seconds. Linear guide rails maintain ±0.2mm parallelism for 0.6–5mm thick PCBs.
Safety-Critical Architecture
-
Tri-Sensor Protection Matrix:
-
Photoelectric barriers (Omron E3Z) halt operation upon intrusion detection
-
Pressure-sensitive edges (Banner SC22-3) reverse motion upon contact
-
Emergency stop circuit (ISO 13850) triggers <0.5s power cutoff
-
-
Thermal-Resistant Construction: Powder-coated carbon steel frame withstands 60°C ambient temperatures near reflow zones.
SMT Ecosystem Interfacing
-
SMEMA/EAP Protocol Engine:
-
24V I/O signals synchronize gate position with upstream/downstream equipment
-
Automated height presets for product changeovers (e.g., 15mm for QFN boards)
-
-
Zero-Interference Transport: 900±20mm unified height plane ensures seamless PCB handoff during vertical transitions.
specification
Specification | ||||
Description | PCBs transmission and a passageway in SMT lines. | |||
Belt type | Oblate belt | |||
Conveyor speed | 0.5-20M/min (customer specified) | |||
Power supply | AC 110/220 volts; single phase | |||
Power | Max. 100VA | |||
Air pressure and consumption | 4-6 bar; max. 48ltr/min | |||
Transport height | 900 ± 20mm (customer specified) | |||
Transport direction | L→R/R→L | |||
Dimension | ||||
Model | Dimension(L × W × H, mm) | PCB board size | Weight (kg) | |
CY-330LD | 1000*730*1050 | 50*50-445*330 | 180 | |
CY-460LD | 1000*860*1050 | 50*50-530*460 | 200 |
Related Products
